Description
It is a starch-based powder adhesive suitable for various types of wallpapers, especially for vinyl ，heavy weight wallpapers and wall-cloth.
Features & Benefits:
Product is characterized by high efficiency and joint strength
Easy mixing with cold water in 2-3 minutes.
Creates an anti-fungal environment
Adhesive does not harm environment
Product is approved by National Institute
Mixing water Ratio: 1: 22~28， package is usually 180g per box, 20kg per bag
Surface preparation
1. Surfaces should be clean, dry and free from dust and flaking paint. Old wallpaper and
loose paint must be removed before applying new wallpaper. If surface is highly
absorptive it should be sized by primer.
2. Dilute enough powder into (tap) water using the chart below. Stir to achieve a smooth consistency. Leave mixed product for approximately 5 minutes. After that, stir it again and it is ready-to-use. Apply the adhesive to the wallpaper, follow wallpaper’s
instructions. Starting from the top, roll paper in place, taking care to roll out air bubbles. Immediately remove excess adhesive and any adhesive on pattern side with damp
cloth.
3. After dissolving adhesive may be stored for 7 days in closed bucket. Stir very well
before use when was stored more than 1 day.