Nonstick coating Paint High Temperature Resistance Ptfe resin
Nonstick Coating Paint have super strong salt water high acid and alkali corrosion resistance, excellent non-stick performance, good adhesion, hardness, and friction resistance, while maintaining green and healthy water-based coatings.
Nonstick coating Paint High Temperature Resistance Ptfe resin
Preferential price high temperature resistance nonstick coating
Product type: Nonstick paint
MOQ: 500kg (We offer free sample !!!)
Model: GJ9102B/ GJ9509A
Nonstick Coating Paint have super strong salt water high acid and alkali corrosion resistance, excellent non-stick performance, good adhesion, hardness, and friction resistance, while maintaining green and healthy water-based coatings.
parameter |
Test method |
Standard range |
|
1 |
固含量 Solid content |
380°C×10min |
35%±2 |
2 |
Viscosity |
With NK-2 杯×25°C(seconds) |
15~30s |
3 |
Theoretical spray volume |
10 microns film thickness |
10m² |
Nonstick coating Paint
Precautions for coating construction:
1.The storage temperature of the paint is 5~40°C, which is the best in the 25°C environment avoiding direct sunlight. The cured ABC component should be used within 24 hours. Please calculate the amount reasonably. The unmixed paint can be stored for 6 months at rest. It is recommended to roll the component C once a month when it is not used for a long time. The unused paint should be stored in a low temperature environment in time.
2.Wear protective glasses during operation. In case of contact with eyes, rinse immediately with plenty of water for at least 15 minutes and send to the doctor.
3.Avoid skin contact during operation. In case of skin contact, wash thoroughly with soap and water. If tingling occurs, seek medical attention immediately
4. Keep adequate ventilation at the operation site to avoid inhalation of steam, fog or droplet. If inhaled, move to fresh air immediately.
5. Extinguishing method and extinguishing agent of paint: Carbon dioxide and dry powder.
6.Emergency treatment of leakage: Inert adsorption materials are used for plugging and removal, And dispose of the waste properly. If the heat exceeds the flash point more than 90°C), to remove the fire source
Nonstick coating Paint
Nonstick coating Paint