White Glue Water Based Environmental Friendly White Emulsion Glue
White glue is a water-based adhesive that is made from the organic monomer, initiating agent, antifoaming agent, stabilizer and chain cutting agent.
White Glue Water Based Environmental Friendly White Emulsion Glue
Water Based Fast Drying PVAC White Latex Glue
Product type: PVAC Glue
White glue is a water-based adhesive that is made from the organic monomer, initiating agent, antifoaming agent, stabilizer and chain cutting agent.
Where to use:
The adhesive is mainly suitable for the bond of wood, MDF, plywood and melamine board, veneer etc. And also suitable for use as the main raw material of wooden architectural coatings.
Appearance | White Paste |
Viscosity (20 °C) | 10000-13000 mPa.s |
Solids Content | Approximately 40% |
Shear Strength | ≥10 mpa |
PH | 6-7 |
Shelf Life | 12 months |
white glue
1. Easy in application;
2. Solidifying at room temperature;
3. High adhesion force;
4. Transparent formed adhesion film;
5. No pollution to the materials;
6. Non-poisonous and nodanger of fire hazard and explosion;
7. No environmental pollution.
Storage Condition:
The product should be kept in a dry and cool storehouse in which the temperature is 10°C-30°C. The storage period is 6 months. If the product exceeds the storage period but is still up to standard through inspecting, the product may be used.
Good Reminds:
1. The ambient temperature must be more than 10°C in using. The white glue is only used for adhesion of porous materials.
2. According to different requirement, the white glue can be diluted with water. The method is that the white glue must be heated to 30°C~40°C, and then put water of 30°C ~40°C into white glue slowly and stir it uniformly. The cold water of below 10°C may not be used for diluting the white glue.
3. After using, the container of white glue should be covered tightly. In order to avoid skin formation on the white glue, put some water on the white glue, which should be stirred uniformly when using.
4. The white glue cannot be used for bonding the metal.
5. The environment should have good ventilation.
white latex glue
Application Tools:
Brusher, scroller, spatula, trowel, etc.
Application:
1. Cleaning: the grease, smirch, rust, moisture of the contacted surface must be cleaned off.
2. Brushing:Thecontactedsurface(twosides)arebrushedwiththeadhesiveinthin layer, brushing toward a same aspect for air getting out to strengthen the powerful viscosity.
3. After applying adhesive,fix the object that is bonded.If heating and pressing, the adhesion will be stronger.
white latex glue