UV Cured Paint
When you look at UV cured paint, you really have to ask yourself what on earth they are talking about. One article compared the effects of ultraviolet light and direct chemical application to three different UV cured oils, which include UV cured olive, grape seed oil, and cork bark oil. One oil was 100% non-irritating; none of the others was at all damaged by ultraviolet light. Clearly the UV cured oils cured by photo activation in the resins are the ones that are being discussed.
The EPA has determined that the cured paint meets the proper standard for indoor use. As long as they consider the paint color to be “pinkish yellow” under certain conditions (which is a pretty low threshold), then it meets the standards that have been set for residential use. In order to be categorized as non-irritating under the EPA’s guidelines for indoor paint, it has to have a much lower pigment density than the paint used for outdoor use, which is one of the reasons it has become so popular with commercial builders and contractors.
UV Cured Paint for veneer
But, what about the debate over what determines the paint’s “production speed”? How do you get the color you want at the production speed you want? Most people agree that increased color density is achieved with increased heat exposure, which is a well-known fact. So the debate goes on.
If you are using acrylic paint and UV cured paints are not being used, you will still experience some of the same problems. Because UV cured oils cannot be sprayed directly on your surface, you must build up the paint on your project by applying it to a substrate. Most commonly this is glass, which has both its advantages and disadvantages. The glass gives you a smooth finish that does not rub off easily. It also has the advantage of providing protection against the sun.
The downside of using UV cured coatings is that the color doesn’t last very long. This is because the coating is not “cured” like oil paints are and therefore stays stiff for a longer period of time. It is only during the drying time that the paint begins to settle and become smooth, after which the coating will begin to break down. Therefore, the longer the drying time, the longer you may have to go without sanding, polishing, or painting.
When you are deciding if a cured technologies are right for your painting projects, be sure to look at all of the pros and cons. Once you have made the decision, make sure that you shop around for the best product. Look for products that meet your needs and specifications, but that also provide you with the best overall value. There are many of cured companies available today, so you shouldn’t have any trouble finding the right product for your painting needs.