Epoxy Self-leveling Flooring Paint Maydos Solvent-free Coating(JD2000)
Epoxy Self-leveling Flooring System is two-component solvent-free epoxy paint. It has a nice appearance,dust-resistant, corrosion-resistant and easy to clean. The flooring system has good bonding with the solid base, good abrasion resistance and durability. Meanwhile, it has certain toughness, brittle-resistance and the load of a certain weight. The compressive strength and impact resistance ability is excellent.
Description
Epoxy Self-leveling Flooring Paint Maydos Solvent-free Coating
Hospital office flooring Food factory Food Grade Dust-Free Self-leveling Epoxy Floor Paint
Product type: Epoxy floor paint
MOQ: 500kg (We offer free sample !!!)
Model: JD2000
Epoxy Self-leveling Flooring System is two-component solvent-free epoxy paint. It has a nice appearance,dust-resistant, corrosion-resistant and easy to clean. The flooring system has good bonding with the solid base, good abrasion resistance and durability. Meanwhile, it has certain toughness, brittle-resistance and the load of a certain weight. The compressive strength and impact resistance ability is excellent.
Technical Data
| Drying time: | Touch dry: 2 hours/ Hard dry: 2 day |
| Compressive strength (Mpa) | ≥85 |
| Impact resistance strength (Kg·cm) | 65 |
| Flexural strength (Mpa) | 40 |
| Adhesive force grade | 1 |
| Pencil hardness (H) | 3 |
| Abrasion resistance(750g/1000r, zero gravity, g) | ≤0.03 |
| Resistance to engine oil, diesel oil for 60 days | Passed |
| Resistance to 20% sulfuric acid for 20 days | Passed |
| Resistance to 20% Sodium hydroxide for 30 days | Passed |
| Resistance to toluene, ethanol for 60 days | Passed |
| Service life | 8-10 years |
Feature
self-leveling epoxy floor paint
Application
Where to Use:
It is mainly used for concrete surface where has compression & wearing resistance and anti-dust and corrosion requirement, such as Car Parking,ndustry workshop, office, warehouse, foodstuff factory etc.
Application instructions:
Application instructions
| Surface preparation | Correct substrate preparation is critical for optimum performance.
Surface should be sound, clean, dry and free from loose particles,oil,grease,and other contaminants. |
| Primer | Prepare a barrel, pour JD-D10A and JD-D10B in it based on 1:1.
Stir the mixture well and then apply it with roller or trowel. The reference consumption is 0.15kg/m². The main purpose of this primer is to seal the substrate completely and avoid air-bubbles inthe body coat. A second coat may be required depending on the oil absorption condition of substrate. The recoat time is about 8 hours. |
| Inspection standard for the primer: even film with certain brightness. | |
| Undercoat | Mix WTP-MA and WTP MB based on 5:1 first,
then add quartz powder (1/2 of the mixture of A and B) into the mixture, stir it well and apply with trowel. The consumption quantity of A and B is 0.5kg /sqm. You can do it one coat at one time or two coats at two times. In the second case, the application interval is about 8 hours at 25 degrees. Sand the first layer, clean it and then apply the second layer. After the whole application, wait another 8 hours, grind it, clean the sanding dust and then continue the next procedure. |
| Inspection standard for the undercoat: Non-sticky to hand, no softening, no nail print if you scratch the surface. | |
| Top coat | Mix JD-2000A and JD-2000 B based on 5:1 and then apply the mixture with spatula.
The consumption quantity is 1.0kg/sqm. |
| Maintenance | 5-7 days. Don’t put the floor into use or wash it with water or other chemicals. |
epoxy floor paint tools
epoxy floor paint color chart
Project case
epoxy floor paint project case
Package
epoxy floor paint
